size
Panel sizes from
600 x 600mm to
1200 x 1200mm
(2ft x 2ft to 4ft x 4ft)
This panel is the perfect solution for combining a great acoustic absorber with a fresh modern image, company logo or a product photograph.
Tom Carter, Daisychain
Reduction of sound reverberation is important in large open plan areas such as restaurants, conference rooms and shopping malls. To address this problem, we have now introduced a sound absorbing panel that can have a photograph or image of your choice printed upon it.
When mounted on a wall, the sound absorbing panel will effectively absorb noise at that point and efficiently reduce the 'bounce back' of the sound. This is particularly effective in areas where a large amount of noise is generated and affected by the surrounding hard surfaces of walls, floors and ceilings and the more there are installed the greater the reduction will be of reverberated noise.
By adding porous materials to the walls of a room, reflected noise is reduced thereby damping the echo effect and so making it easier to communicate. It is important to use effective sound absorbing panels for this, which will also fit in with the aesthetics of the room or building.
Photosorption has been specifically created to fill this requirement and cleverly disguise our acoustic sound absorbing panels as artwork. This creative solution to successfully reduce echo and reverberation is a great success for areas where aesthetics is of high priority. The panels can be printed with any photograph of your own as long as it is of high enough picture quality.
If you supply us with a high resolution image of your logo, or a picture of your choice, we can print this onto a sound absorbing panel, which can be mounted in your own reception area or office.
The main criteria to make this possible is to supply us with a photograph or image with a minimum of 360 DPI, which can normally be supplied to us on a cd. Pictures of this quality are normally taken on film because digital images are not normally of a high enough resolution.
The facing of each sound absorber is 100% polyester. This is used for its acoustic transparency and high digital printing quality.
The image is wrapped around the edge of each panel and fixed to the back to create a neat finish so it is best if an image is chosen that has plenty of space around the edges.
Alternatively, choose an image from our photo gallery above.The pictures there will give you an idea of what can be printed on the fabric. If you have a specific image in mind please call us on 0845 363 7131 and ask for our technical department.
Photosorption sound absorbing panels have a very efficient, highly absorptive inner core of semi rigid acoustic mineral wool. Combined with the digitally printed acoustically transparent polyester covering, the panel presents a very attractive sound absorber that will aesthetically and acoustically enhance restaurants, museums, galleries, libraries, conference rooms, offices, dining rooms, cinemas, music venues, shopping malls, airports, banks, classrooms, reception areas, retail environments and many others.
They are easily bonded to a wall using our special adhesive that makes installation very easy. Full details on how to install these panels can be obtained by referring to our fixing guide.
PLEASE NOTE THAT DUE TO PACKAGING REQUIREMENTS THERE IS A MIN ORDER FOR 2 PANELS PER ORDER.
As featured on www.buildingdesign.co.uk
