product details

size
1.2m x 1.2m x 2.75cm thick
. Min of 5 panels per order.

PRICES technical specs installation guideDOWNLOAD PDF

key benefits

QuietPanel - Thinner wall soundproofing System


QuietPanel thinner soundproofing for walls
QuietPanel installation details to reduce noise through party walls side view of acoustic insulation used to make QuietPanel
QuietPanel thinner soundproofing for walls

overview

The QuietPanel thinner wall soundproofing system has been developed to upgrade existing party walls with very limited space to reduce sound transmission and noise from neighbours. It can be applied to either masonry or stud walls and is also suitable to reduce flanking noise in the walls.

 

description.

The QuietPanel Thinner Wall Soundproofing System has been developed to upgrade existing party walls with very limited space to reduce sound transmission and noise from noisy neighbours. It can be installed onto either masonry or stud walls and is suitable to reduce flanking in the walls. It is a proved solution to upgrade walls that have failed a Part E pre-completion test. Meets Part E of the Building Regulations. Extra thin composition means little space is lost combined with high acoustic performance. The QuietPanel Acoustic Wall System is easy to install and available from stock for fast delivery nationwide. For shipping reasons there is a min order of 5 panels per delivery.

Specification

Composition 15mm noise blocking layer laminated to 12.5mm non-flammable, high density sound blocking acoustic panel.

 

Board Size: 1.2m x 1.2m

Thickness: 2.75cm

Weight: 24.7kg each

Part E Requirement: 43dB

QuietPanel Performance: 44dB

Note. These panels are produced with the sound insulation short of the edges of the plasterboard and not as shown in the photos above of cut panels. This is normal and does not affect the sound insulation these panels have been tested to give.

Installation

Because the Acoustic Plasterboard element of this sound insulation is fragile it can become damaged during transit. Any damage sustained can be repaired after installation by filling with Acoustic Sealant or for larger holes with a Polyfilla type hole filler without affecting the sound blocking properties of the product.

Please click on the Installation tab above to access the installation instructions on how to install this system yourself. Easily DIYable but for more expert fitting, we may be able to offer an installation service in your part of the UK so contact us to see if we have fitters that work in your area. The installation will be performed to the highest standards by skilled and experienced tradesmen. These expert installers understand the importance of fitting sound insulating materials absolutely perfectly and they have the specialist skills to ensure that all soundproofing materials are fitted correctly every time. As they are both experienced and skilled, they are also able to provide a highly efficient and cost-effective service.

If fitting the product yourself, Acoustic Sealant must be used around the perimeter where the product meets the juxtaposed walls, floors and ceilings to ensure compliance.

 

Please note: QuietPanel is effective at reducing normal noise levels that should not be expected to be heard, such as talking, radio and TV sound. Loud music, loud noise and bass noise will always be audible although its intensity will be reduced. To reduce loud noise and bass or vibration please see our thicker Resilient Bar system

We do not accept any responsibility for the structural weight acceptance of any building and whether it can withstand the weight of any products or combination of products. If you are concerned we feel you may benefit from the advice of a professional at your own cost. Refunds will not be given under these circumstances.

PLEASE BE AWARE THESE PANELS WEIGH 24.7KG EACH SO YOU MAY REQUIRE HELP LIFTING.

 


"));