Soundproofing Kit for Single Door
This acoustic doorseal kit will upgrade the soundproofing of any lightweight internal door. It comes with DIY instructions and is easy to fit. The kit includes a soundproofing mat to add mass and a full set of acoustic seals for the perimeter of the doorframe and an easy to fit drop down threshold seal for the bottom of the door leaf.
Please note: This kit is only suitable for internal lightweight doors and must not be used for external doors. The kit is designed to fit doors with a leaf width of between 830mm to 930mm. If your door leaf is otside of these sizes, please contact us before ordering so that we can offer an alternative size drop down seal at no extra cost.
Kit 1 - For a single door comprises
- 1 x 1m RP120 Self Adhesive Seal for the top of your door
- 4 x 1m RP120 Self Adhesive Seal for the side of your door (2 lengths for each side).
- 1 x 930mm Drop Down Seal (can be shortened by up to 100mm by the installer)
- 1 x Soundproofing Mat (1.8m x 1.2 m)
- 1 x Can of Special Spray Adhesive
- 1 x Set of installation instructions
This acoustic door seal kit comes with everything you will need to uprate a standard door and saves the expense of a full Acoustic Doorset & frame.
A thin ply or MDF wood panel can be installed on top of the Soundproofing Mat to finish off the newly soundproofed door.
If your looking for any alternative type of acoustic seal please contact us because we are able to supply alternatives.
WE ALSO SUPPLY A VERSION OF THIS KIT WITHOUT THE SOUNDPROOFING MAT AND ADHESIVE. IF YOU WOULD PREFER THIS PLEASE CLICK HERE
featured on www.buildingdesign.co.uk